4-channel Microflex Advance Audio Network Output Interface
Model: ANI4OUT
- Single Ethernet port carries Dante audio, power (PoE - class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
Converts Dante™ digital audio signal to four discrete line/mic analog signals.
The Shure Audio Network Interface shall convert 4 channels of Dante™ digital audio into discrete analog output signals. The interface shall provide connectivity with analog devices (audio processors, video codecs, and loudspeaker systems, for example) to fully integrate networked audio and analog equipment in a single system. Available in XLR and block connector versions, each box uses a single network cable to receive audio and power through Power over Ethernet (PoE). The web application shall control built-in digital signal processing, including channel settings, parametric equalization, and audio summing from any computer connected to the same network.
- Single Ethernet port carries Dante audio, power (PoE - class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
- Browser-based software control for all device parameters, per output channel:
- Mute control
- Digital gain
- Polarity control
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector and standard XLR variations
- Applications:
- Conferencing
- Available Options:
- ANI4OUT-XLR: 4-Channel Dante™ Mic/Line Audio Network Interface-Out with XLR connectivity
- ANI4OUT-BLOCK: 4-Channel Dante™ Mic/Line Audio Network Interface-Out with Block connectivity
- Warranty - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 19.94 F
- Active Power: 10 Watt
- Depth: 5 in
- Height: 1.60 in
- Width: 5.50 in
- Product Weight: 1.50 lbs
- Warranty (Length/Type): 2 Year Limited
- Input:
• (1) RJ45 - Outputs:
•ANI4OUT-XLR (4) XLR connector
•ANI4OUT-BLOCK (4) 6-pin block connector - Configuration:
•Impedance Balanced - Polarity:
•Non-inverting, any input to any output - Power Requirements:
•Power over Ethernet (PoE), Class 0 - Control Application:
•HTML5 Browser-based - Storage Temperature Range:
•-29°C (-20°F) to 74°C (165°F) - NETWORKING:
•Cable Requirements
•Cat 5e or higher (shielded cable recommended) - Frequency Response:
•20 to 20,000Hz - Input (Dante Digital Audio):
•Channel Count 4
•Sampling Rate 48kHz
•Bit Depth 24 - Latency:
•Does not include Dante latency
•0.71ms - Dynamic Range (Analog-to-Dante):
•20Hz to 20kHz, A-weighted, typical
•117dB - Total Harmonic Distortion:
•@ 1kHz, -20dBFS, 0dB analog gain
•<0.05% - Output Clipping Level:
•Line: +20dBV
•Aux: +0dBV
•Mic: -26dBV - Analog Output Level:
•Selectable
•Line: 0dB
•Aux: -20dB
•Mic: -46dB - Output Impedance:
•150-ohm - Built-in Digital Signal Processing:
•Per Channel: Equalizer (4-band Parametric), Mute, Invert Polarity, Gain (140 dB range)
•System: Audio Summing
Suggested Products
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com