Radial McBoost Microphone Signal Intensifier
Model: R800 8016 00
- 25dB signal booster for dynamic & ribbon mics
- Extends dynamic range and microphone reach
- Uses standard 48V phantom for power
- 3-position load switch and high-pass filter
The 100% discrete class-A circuit design begins with a dual-transistor J-FET circuit to produce up to 25dB of gain without introducing noise, color or artifact. Each individual transistor is carefully measured and batch-sorted to comply with the design specification to certify performance. As with all Radial™ products, the circuit board is then loaded into a 14-gauge, I-beam, reinforced steel enclosure to prevent outside stress from torquing which otherwise could lead to premature part failure. A book-end cover creates protective zones at each end to safeguard the switches, potentiometer and connectors from the rigours of the road.
Merely connect the McBoost in-line using standard 3-pin XLRs and activate 48V phantom to provide power. Select between three impedance settings to optimize the response and then reduce low-frequency clutter with the 3-position high-pass filter. The McBoost will elevate the output to produce added clarity, excitement and extra drive for long cables whether you are in a recording studio, on a live concert stage or in a broadcast center.
- 25dB signal booster for dynamic & ribbon mics
- Extends dynamic range and microphone reach
- Uses standard 48V phantom for power
- 3-position load switch and high-pass filter
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 41 F
- Depth: 4.20 in
- Height: 1.68 in
- Shipping Depth (with packaging): 6.25 in
- Shipping Height (with packaging): 3 in
- Shipping Width (with packaging): 4.25 in
- Width: 2.76 in
- Product Weight: 0.50 lbs
- Shipping Weight: 1.40 lbs
Suggested Products
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com