3LCD Solid Shine Laser Projector

Model: PT-MZ13KU

Part #: PT-MZ13KL

Laser LCD, 13,000 lumens, WUXGA
Compact and lightweight body, designed with ultra-low noise operation
Long lasting laser light source and low-maintenance design provide high brightness and superb image quality

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The PT-MZ13KU is a 13,000 lumen, WUXGA, Solid Shine laser projector designed for house of worship, education and business use featuring 4K Signal Input.

Laser LCD, 13,000 lumens, WUXGA
Compact and lightweight body, designed with ultra-low noise operation
Long lasting laser light source and low-maintenance design provide high brightness and superb image quality

Aspect Ratio - 16:10
HDBaseT - Yes
Number of Imagers - 3-chip
Projector Applications - Corporate
Projector Applications - Education
Projector Applications - Houses of Worship
Projector Technology Type - LCD
Supported Resolution - WUXGA (1920x1200)
Spec Sheet available - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Brightness Full: 13000 lumens
Depth: 17.31 in
Height: 7.28 in
Width: 25.59 in
Product Weight: 49.20 lbs
Projector Type: LCD projectors
DLP™ chip - Panel size (inch): 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
DLP™ chip - Display method: Transparent LCD panel (x 3, R/G/B)
DLP™ chip - Number of Pixels: 2,304,000 (1920 x 1200) pixels x 3 , total of 6,912,000 pixels
Light Source: Laser diodes
Light Output: 13,000 lm
Time until light output declines to 50 %: 20,000 hours (NORMAL) / 24,000 hours (ECO)
Screen size [diagonal] (inch): 1.78–25.4 m (70–1,000 in), 16:10 aspect ratio
Lens: Optional powered zoom lenses
Lens shift - Vertical (from center of screen): TBD
Lens shift - Horizontal (from center of screen): TBD
Keystone Correction Range: Vertical: ±40°, Horizontal: ±15°
Keystone correction range with optional ET-UK20 Upgrade Kit: Vertical: ±40°, Horizontal: ±40°
Installation: Ceiling/floor, front/rear, free 360-degree installation
Terminals - SDI IN: BNC x 1: 3G/HD/SD-SDI input
Terminals - HDMI IN: HDMI 19-pin x 1 (Compatible with HDCP, Deep Color)
Terminals - DVI-D IN: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
Terminals - MULTI PROJECTOR SYNC IN: BNC x 1
Terminals - MULTI PROJECTOR SYNC OUT: BNC x 1
Terminals - SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals - SERIAL OUT: D-sub 9-pin (male) x 1 for link control
Terminals - REMOTE 1 OUT: M3 stereo mini-jack x 1
Terminals - REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
Terminals - LAN: RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
Terminals - DIGITAL LINK/LAN: RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP, Deep Color)
Power Supply: AC 100-240 V, 50/60 Hz
Power Consumption: TBD
Cabinet materials: Molded plastic
Operation noise: 35 dB/TBD/TBD (NORMAL/ECO/QUIET) (TBD)
Dimensions (W x H x D) (inch): 650 x 185 x 440 mm (25 19/32" x 7 9/32" x 17 5/16" ) (Without lens) (Not including protruding parts)
Operating Environment: Operating temperature: 0–45 °C (32–113 °F); Operating humidity: 10–80 % (no condensation)
Applicable Software: Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
Note: 1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [2], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *3 With legs at shortest position.*4 Average value. May differ depending on the actual unit. *5 Light output is limited at operating temperatures higher than 30 °C (86 °F), and projectors cannot be operated at altitudes higher than 2,700 m (8,858 ft) above sea level.
Terminals - REMOTE 1 IN: M3 x 1 for wired remote control
Terminals - USB: USB Connector (Type A) x 1 (Output 5 V/2 A)
Center-to-corner zone ratio: 0.9
Filter: Included (Estimated maintenance time: approx. 20,000 hours)
Terminal - RGB In: D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)

266704_PT-MZ13KL_SPEC_FILE_ENGLISH.pdf 1748258 kb - Data Sheet

Project List

Suggested Products

Epson QL3000 4K HDR High-Lumen 3LCD Laser Projector - White

by EPSON

Epson QL3000 4K HDR High-Lumen 3LCD Laser Projector - Black

by EPSON

Epson QL7000 4K HDR High-Lumen 3LCD Laser Projector - White

by EPSON