Signal Processing Systems : Combiners : Martin Professional - Martin RDM 5.5 Splitter

Martin RDM 5.5 Splitter

Model: Martin RDM 5.5 Splitter

DMX Splitter / Booster
Opto-isolated DMX Output ports
DMX loop through port with built-in termination
5-pin XLR Input and Outputs
RDM E1.20 compliant

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The Martin RDM 5.5 Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin 5.5 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin RDM 5.5 Splitter will help to rectify the signal.

DMX Splitter / Booster
Opto-isolated DMX Output ports
DMX loop through port with built-in termination
5-pin XLR Input and Outputs
RDM E1.20 compliant
Optimized for Martin fixture firmware upload
Universal power supply
PowerCon connectors in/out for easy daisy-chaining
Rack, truss and wall mountable
Lightweight yet robust construction

Combiner Type - Splitter/Combiner
Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 131 F
Operating Temperature (Minimum): -22 F
Certifications: EU, EMC, EN, UL, FCC, CAN/CSA, CE, ICES, EIA, ANSI
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 4 Watt
Depth: 4.92 in
Height: 1.77 in
Width: 8.66 in
Product Weight: 1.98 lbs

Martin DMX 5.3 Splitter - Martin DMX 5.3 Splitter

Splitter 256455 kb - Data Sheet

Project List

Suggested Products

Remote Control for RCX-5C Room Combiner

by RDL, Radio Design Labs

Datapath’s 4K Quad Splitter

by Datapath Ltd.

Passive Audio Divider/Combiner - 150 ohm

by RDL, Radio Design Labs