Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Product Info
Tech Specs
Documents
This is a complete Surround Kit with five carefully factory-matched . Even though the standard tolerances on the 4015s are extremely low, the surround match is even closer. The specially selected 4015 Wide Cardioid Microphones are matched within ±1 dB on both frequency response and sensitivity from mean of set. Recording orchestras or other acoustic ensembles sometimes requires a compromise between blending in the room reverberation and a more precise localization. The natural response and dynamic range make this Surround Kit an obvious choice for precise tone quality and wide dynamic range. This is a great solution for AB, Decca Tree or surround main arrays like our Wide Cardioid Surround Array.
- Microphone Type - Condenser
- Polar/Pickup Pattern - Cardiod
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): -40 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 40 Hz
- Minimum Frequency Response (Bandwidth): 0.04 kHz
- Dynamic Range: 121 dB
- Maximum SPL (Sound Pressure Level): 159 dB
- Sensitivity: -40 dB
- Signal to Noise Ratio: 76 dB
- Product Weight: 0.35 lbs
- Warranty (Length/Type): 5 Years
- Principle of operation: Pressure gradient
- Frequency Range: 20 - 20 Hz - kHz
- Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
- Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
- Max. SPL, peak before clipping: 159 dB
- Switchable attenuator: 0dB/-20dB
- Output Impedance: <200 ohm
- Minimum Load Impedance: 2 kohm
- Output balance principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): >60 dB
- Power supply (for full specifications): 48 V Phantom power (± 4 V)
- Current Consumption: 2.80 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Output voltage, RMS: >5 V
- Polarity: +V at pin 2 for positive sound pressure
- Relative Humidity (RH): Up to 90 %
- Matching tolerance: ±1 dB
- Phase deviation for kit: <10 °
- Shipping Height (with packaging): 10 in
- Shipping Width (with packaging): 12 in
- Shipping Weight: 10 lbs
- Shipping Depth (with packaging): 12 in
- Color: Black
Surround Kit
1648 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 5015A
Request more information from a dealer near you
close
Request more information from a dealer near you