Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4017B-R
Series: Pencil Microphones
Model: 4017B-R
- Modular
- Supercardioid, Lobe-shaped
- With Rycote
Product Info
Tech Specs
Documents
This condenser microphone capsule is part of the flexible Recording Microphones Series. It is equipped with a highly-directional hypercardioid pickup pattern; obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection. The Shotgun Mic Capsule is immune to RF emission and the 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping. It withstands use in very humid environments with ease. It delivers clear sound even when used in very hot or cold areas of the world such as the desert and the arctic. Extensive research and development has been undertaken to optimize the sound coming from the sides and back of the microphone. One of the key accomplishments is that we have minimized the often un-linear response of a shotgun microphone due to its side lobes. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications. The sound coming from the sides and back of a shotgun often sounds unnatural but DPA has managed to make these additions to sound natural as well – just damped.
- Modular
- Supercardioid, Lobe-shaped
- With Rycote
- Microphone Type - Condenser
- Polar/Pickup Pattern - Supercardiod
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): -40 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 70 Hz
- Minimum Frequency Response (Bandwidth): 0.07 kHz
- Dynamic Range: 119 dB
- Maximum SPL (Sound Pressure Level): 152 dB
- Sensitivity: -34.40 dB
- Signal to Noise Ratio: 80 dB
- Product Weight: 0.15 lbs
- Warranty (Length/Type): 5 Years
- Principle of operation: Pressure gradient, with interference tube
- Frequency Range: 20 to 20 Hz to kHz
- Equivalent noise level, A-weighted: Typ. 14 dB(A) re. 20 µPa (max. 15 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (max. 26 dB)
- Total Harmonic Distortion (THD): <1 % up to 133 dB SPL peak
- Minimum Load Impedance: 2 kohm
- Filters: High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
- Output Impedance: <150 ohm
- Output balance principle: Signal balanced
- Common Mode Rejection Ratio (CMRR): >40 dB
- Power Supply: 48 V Phantom power (± 4 V)
- Current Consumption: 4.50 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
- Output voltage, RMS: >1.8 V
- Polarity: +V at Pin 2 for positive sound pressure
- Relative Humidity (RH): Up to 90 %
- Shipping Height (with packaging): 8 in
- Shipping Width (with packaging): 2 in
- Shipping Weight: 2 lbs
- Shipping Depth (with packaging): 12 in
- Color: Black
Shotgun Microphone
3087 kb
- Data Sheet
Request Quote
Suggested Products
by
Sennheiser
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 4017B-R
Request more information from a dealer near you
close
Request more information from a dealer near you