Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Sensor Integration Module
Series: Green Light
Model: GLS-SIM
Part #: 6502480
- Provides Cresnet connectivity for Crestron GLS-series and third-party sensors
- Works with occupancy sensors, photocells, partition sensors, and more
- Provides 24 Volts DC to power one or more sensors
- Includes 2 independent sensing inputs
- Supports contact-closure, DC logic, and 0-10V analog signals
Product Info
Tech Specs
Documents
Accessories
Sensor integration module for Cresnet connectivity designed to allow Crestron Green Light sensors to be connected directly to a Cresnet control network. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network. The GLS-SIM installs easily at the sensor location, mounting conveniently inside the electrical box or exposed above the ceiling. Wiring connections to the network and sensor are facilitated using miniature screw terminals. he GLS-SIM is compatible with Crestron GLS-series sensors, as well as with most 24 Volt-powered sensors from any manufacturer. Up to 1A @ 24VDC power is available[1] to support multiple sensors in parallel. The GLS-SIM actually includes two sensing inputs, each capable of sensing a contact closure, logic level, or 0-10V analog signal. When used with a Crestron IPAC or iLux system, setup is simplified using onboard DIP switches to select the sensor type (i.e. occupancy, photocell, partition, etc.) and operating mode (i.e. normally-open or normally-closed).
- Provides Cresnet connectivity for Crestron GLS-series and third-party sensors
- Works with occupancy sensors, photocells, partition sensors, and more
- Provides 24 Volts DC to power one or more sensors
- Includes 2 independent sensing inputs
- Supports contact-closure, DC logic, and 0-10V analog signals
- Onboard DIP switches simplify setup for use with IPAC and iLux systems
- Allows fully-programmable operation as part of any Crestron system
- Compact module fits in an electrical box behind the sensor
- Miniature screw terminals facilitate reliable wiring connections
- Systems Controlled - Lighting
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 0.04 Amps
- DC Voltage: 24 Volts
- Depth: 0.87 in
- Height: 2.01 in
- Width: 2.01 in
- Product Weight: 0.10 lbs
- Cresnet Power Usage: 1 W (0.04 Amps @ 24 VDC)
- Humidity: 0 to 95 % (RH, non-condensing)
- LED Indicators: PWR, NET, SETUP
- Controls: ID CODE, MODE, SETUP
- Impedance: 20 kohms
- Sensor: 4-pin 3.5mm detachable terminal block
- NET: 4-pin 5mm detachable terminal block
Sensor Integration Module
353 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Crestron Electronics, Inc.
Model: GLS-SIM
Request more information from a dealer near you
close
Request more information from a dealer near you