Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Hanging Ceiling Microphone for the Dante
Model: M55WD
- Optimized for voice recognition
- Low-noise preamp circuitry
- Immunity from RF interference
- Two-color LED status indicator
- RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
Product Info
Tech Specs
Related Products
Documents
The M55WD is an innovative, hanging ceiling microphone system designed for applications where aesthetics, sound quality, and ease of installation are critical. All electronics are fully integrated with high sensitivity and low noise. The signal output is balanced to eliminate RF interference caused by cell phones and mobile devices.
Installing the M55 requires just one 5/8inch hole in the ceiling, with no additional tools needed. The M55's mounting hardware easily adjusts the hanging height up to four feet from the ceiling surface without removing ceiling tiles and allows for fingertip height adjustment and roHigh output allows distance miking.
- Optimized for voice recognition
- Low-noise preamp circuitry
- Immunity from RF interference
- Two-color LED status indicator
- RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
- No external power adaptor required
- Designed, assembled, and tested by Audix in the USAtation control. An optional aiming clip (MCHANGER) easily makes any additional angular adjustments
- Applications:
- Video teleconferencing
- Distance learning
- Boardrooms
- Surveillance
- Hospital and medical procedures
- Ambient room miking
- Includes:
- 1.56mm / 0.063inch seismic and fire cable restraint
- Dante Enabled - Yes
- Microphone Type - Condenser
- Polar/Pickup Pattern - Cardiod
- Spec Sheet available - Yes
- Output Impedance: 150ohms
- Sensitivity: 38mV (C) / Pa at 1k
- Equivalent Noise Level: 22dB (A-weighted)
- Power Requirements: 18 - 52V phantom
- Connector: RJ45
- Recommended Cable: CAT5, CAT5e, CAT6, CAT6a, or CAT7
- Materials / Finish: Aluminum and zinc alloy / white finish
- Weight: 70g / 2.4oz (Mic and Cable), 499g / 17.6oz (Junction Box and Safety Cable)
- Maximum Frequency Response (Bandwidth): 10 kHz
- Maximum Frequency Response (Bandwidth): 10000 Hz
- Minimum Frequency Response (Bandwidth): 60 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Dynamic Range: 108 dB
- Maximum SPL (Sound Pressure Level): 130 dB
- Signal to Noise Ratio: 72 dB
ADX40
- Miniature Hanging Microphone
ADX60
- Cardioid Pre-polarized Boundary Condenser Microphone
ATS1LP
- Heavy-duty Shock Absorbent Microphone Table Stand with 5-pin Terminal Connector
DN4
- Dante | AES67 Microphone Interface
DN43
- Dante | AES67 Microphone Interface for the Audix M3 tri-element microphone
GS1
- Flush mount wall cardioid mic with nickel finish. Mic can be rotated for directivity. 18-52 V phantom power.
LCB1
- Logic control button. Designed to remotely control the on-off function of a microphone (or other devices) when used in conjunction with a logic enabled media system.
M3
- Tri-element Hanging Ceiling Microphone
M3DK
- Microphone and Interface Kit for the Dante | AES67 Integrated Microphone System
M3WHM
- Tri-element Ceiling Microphone
M40
- Miniaturized Condenser Ceiling Microphone
M55
- Hanging Ceiling Microphone with Height Adjustment
M60
- Boundary Condenser Microphone with Integrated Circuitry
M65
- Tabletop Installed Microphone
M70
- Flush Mount High Output Ceiling Microphone for Distance Miking
M70WD
- Flush-mount Ceiling Microphone for the Dante
Microphone
412856 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Audix Corp
Model: M55WD
Request more information from a dealer near you
close
Request more information from a dealer near you