USB-C Hub with Power Delivery Analyzer + Tester | USB 3.2 Gen2x1 (10Gbps)
Model: S99-USBHUB-3C-PRO
- 8 USB-C (Type-C) ports
- 6 Individually-controllable dual-data dual-power USB 3.2 Gen 2 (10Gbps) ports (Type-C)
- 1 Dedicated control port (can be controlled from any port)
- 1 Dedicated power input port
- Individually enable Hi-Speed (480Mbps) and SuperSpeed (5Gbps/10Gbps) data lines on each port
The USBHub3c is has 6 full-featured dual-role data and dual-role power USB-C ports, 1 dual-role power upstream-facing control port, and 1 power sink port. It enables PD analysis on all 8 of these ports, advanced device charge control on 6 ports, and when used as a "normal hub" supports 5 devices.
It gives developers full control to validate, control, and test the limits of devices built on the Power Delivery (USB-PD) and USB specification. Simple software APIs allow control over all USB-PD parameters, including intentional error states, connectivity options and real time measurements.
Being bus-powered or self-powered, the USBHub3c can be used in any environment. The USBHub3c is the only bus-powered USB hub that supports PD sourcing. Even better, Acroname's AnyPort™ technology allows the host (UFP) port to be assigned to any of the 6 numbered ports. The hub also fully supports data and power role swaps including fastrole swaps.
- 8 USB-C (Type-C) ports
- 6 Individually-controllable dual-data dual-power USB 3.2 Gen 2 (10Gbps) ports (Type-C)
- 1 Dedicated control port (can be controlled from any port)
- 1 Dedicated power input port
- Individually enable Hi-Speed (480Mbps) and SuperSpeed (5Gbps/10Gbps) data lines on each port
- Turn any port on or off via software control without physical interaction
- Flip USB-C connections via software without physical interaction
- Control and monitor via USB: through the dedicated Control Port or the assigned upstream port
- Assign host/upstream or device/downstream role to any port
- Assign power source or sink role to any port
- Support USB-PD modes up to 20V/5A on each port
- Constant Current Limiting on each port
- Supports USB-PD Fixed, Variable, Battery, and Standard Power Range (SPR) sink and source profiles
- Ambient temperature range up to 50°C
- ESD protected to ±15kV contact discharge (certified to IEC61000-4-2 Level 4)
- Ships with (1) universal 100-240VAC 100W 20V/5A USB-C PD power adapter, (2) USB C-C e-marked 5A cables, (1) USB A-C cable
- DIN rail mountable (Acroname part C56-DINM-1 or C55-DINRA-1)
- Fast Role Swap Support
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Number of Ports: 6
- AC Voltage: 60 Volts
- Current Draw: 27 Amps
- Depth: 4.88 in
- Height: 1.17 in
- Width: 7.95 in
Suggested Products
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com