Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Passive Single-Pair Sender, Twisted Pair Format-A
Series:
Model: TX-TPS6A
- Single +4 dBu Low-Impedance Balanced Audio Input
- Input on Detachable Terminal Block
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through from LOOP IN Jack
- Passive Circuitry Does Not Require Power
Product Info
Tech Specs
Related Products
Documents
Accessories
The TX-TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One low-impedance +4 dBu balanced line-level audio source connects to the module using the detachable terminal block. A studio-quality transformer provides isolation between the audio source and the RJ45 OUTPUT. The TX-TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the front-panel switch during installation. This module drives only one cable pair, therefore a LOOP IN RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to the LOOP IN jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The TX-TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C. The TX-TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to the LOOP IN jack, that power is passed through to the modules connected to the OUTPUT jack.
- Single +4 dBu Low-Impedance Balanced Audio Input
- Input on Detachable Terminal Block
- Switch Selects which RJ45 Pair (A, B or C) is Fed
- Signal and Power Pair Pass-Through from LOOP IN Jack
- Passive Circuitry Does Not Require Power
- Galvanic Isolation through a Studio-Quality Transformer
- Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Total Harmonic Distortion + Noise (THD+N): 0.04 %
- Depth: 2.09 in
- Height: 1.60 in
- Width: 3 in
- Inputs: Low-impedance Balanced; Recommended source impedance < 150 ohm
- Overall Length: Detachable Terminal Block (Balanced)
- Input Level +4 dBu balanced;: +22 dBu Max
- Format-A Signal Pair Used: Switch-selectable A, B, or C
- Format-A Input: RJ45 LOOP IN
- Outputs: RDL TP Format-A
- Output Connection: RJ45
- Frequency Response: 20 to 20000 Hz (+/- 0.1 dB)
- Headroom above +4 dBu: > 18 dB
- CMRR: > 85 dB (50 Hz to 150 Hz)
- Power Requirement: Passive
D-BT1A
- Wall-mounted Bluetooth Audio Format-A Interface
D-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output
D-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs
D-TPS1A
- Active Single Pair Sender Twisted Pair Format-A XLR Microphone Input with Phantom
D-TPS2A
- Active Two Pair Sender Twisted Pair Format-A Stereo RCA Jack Inputs
D-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
D-TPSM2A
- 2-pair Audio Sending Module, White
DB-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
DB-TPS3A
- DB-TPS3A
Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs
DB-TPSM2A
- 2-pair Audio Sending Module, Black
DS-BT1A
- LED Status Indication Wall-mounted Bluetooth Audio Format-A Interface
DS-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output
DS-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out
DS-TPS1A
- Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR mic input w phantom
DS-TPS2A
- Active Two-Pair Sender - Twisted Pair Format-A - Stainless - stereo phono jack inputs
DS-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone & Stereo Mini-jack In
DS-TPSM2A
- 2-pair Audio Sending Module, Stainless Steel
FP-TP4PW
- Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through
FP-TPX3A
- Format-A Twisted Pair Remote Controlled Mixer
RU-BNF
- Format-A Bi-directional Network Interface
RU-BNFP
- Format-A Bi-directional Network Interface with PoE
RU-FN
- Format-A to Network Interface
RU-TP4PW
- Power Inserter - Twisted Pair - four sets of outputs - signal loop-through
RU-TPDA
- Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs
RU-TPS4A
- Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs
TX-TPR1A
- Active Single-Pair Receiver
TX-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs
TX-TPR6A
- Passive Single-Pair Receiver, Twisted Pair Format-A
TX-TPS1A
- Active Single-Pair Sender, Twisted Pair Format-A
TX-TPS3A
- Active Three-Pair Sender, Twisted Pair Format-A
Datasheet for Passive Single-Pair Sender - Twisted Pair Format-A
215248 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Radio Design Labs
Model: TX-TPS6A
Request more information from a dealer near you
close
Request more information from a dealer near you