2 x 5" 350W 3-channel Ultracompact Wide-coverage Loudspeaker
Series: Ultra
Model: UPM-2XP
- IntelligentDC technology affords the flexibility of lengthy cable runs without AC conduits
- Extraordinary fidelity and power capability in an ultracompact package
- Metal dome tweeter delivers a smooth high- frequency response
- Narrow, symmetrical pattern provides precise coverage control
- Unique crossover design eliminates combing and yields a consistent midrange response
As a standalone loudspeaker, the UPM-2XP can be used for vocal reinforcement, frontfill coverage, or delay coverage for under- balcony applications. For full-range systems, the UPM-1XP can be paired with Meyer Sound's UMS-1XP ultracompact subwoofer with IntelligentDC technology.
The UPM-2XP's high-frequency section includes a 1-inch metal dome tweeter on a constant- directivity, high-frequency horn with a 45-degree beamwidth. The low/mid-frequency section includes two 5-inch cone transducers that work in parallel at low frequencies – delivering a combined acoustic output – with one of the drivers rolling off above 320 Hz to prevent interference in the crossover region due to comb filtering effects. The proprietary drivers, which are manufactured at Meyer Sound's factory in Berkeley, California, are powered by three channels of onboard power amplification that include an active crossover, driver protection, and frequency and phase correction circuitry.
With IntelligentDC technology, the UPM-2XP receives DC power and balanced audio from a single loudspeaker connector, available as Phoenix™ 5-pin male, sealed SwitchCraft® EN3TM 5-pin male, or sealed ECO-M 7-pin male. Powering the unit from an external source eliminates the need for wiring conduits while still preserving the advantages of self-powered systems. The UPM-2XP's amplifier and signal- processing circuits store DC power and tolerate voltage drops, thereby accommodating light- gauge cables and lengthy cable runs.
The UPM-2XP requires an external MPS-488HP IntelligentDC power supply. The single-space 19- inch rack unit distributes DC power and balanced audio to up to eight UPM-2XP loudspeakers, or other Meyer Sound IntelligentDC loudspeakers. Composite multiconductor cables, such as Belden® 1502 or equivalent, can deliver both DC power and balanced audio to loudspeakers at cable lengths up to 150 feet with just 1 dB of loss in peak SPL using 18 AWG wire. Longer cable runs are possible with heavier gauges. Meyer Sound's RMS remote monitoring system is optionally available for the MPS-488HP.
The UPM-2XP cabinet is coated with a black textured finish and includes three threaded, recessed nut plates (3/8"-16 or metric M10). Optional rigging hardware includes the MYA-UPM mounting yoke, MUB-UPM U-bracket, and MSA-UPM stand adapter. Other UPM-1XP options include weather protection and custom color finishes for fixed installations and installations with specific cosmetic requirements.
- IntelligentDC technology affords the flexibility of lengthy cable runs without AC conduits
- Extraordinary fidelity and power capability in an ultracompact package
- Metal dome tweeter delivers a smooth high- frequency response
- Narrow, symmetrical pattern provides precise coverage control
- Unique crossover design eliminates combing and yields a consistent midrange response
- Exceptional SPL to size ratio
- Applications
- Frontfill and under-balcony fill coverage
- Theatrical sound reinforcement
- Portable and installed AV systems
- Effects for theatre
- Compact voice reinforcement systems
- Horizontal Symmetry - Yes
- Loudspeaker Mount Type - Cluster
- Vertical Symmetry - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 80 Hz
- Certifications: UL, CE
- Construction: Premium Birch Plywood (Enclosure), Hex-stamped steel (Grille)
- Coverage Horizontal: 45 degrees
- Coverage Vertical: 45 degrees
- Sensitivity: -8 dBV
- DC Voltage: 48 Volts
- Depth: 7.70 in
- Height: 18 in
- Width: 6.85 in
- Product Weight: 17 lbs
- Color: Black
- Speaker Diameter (Driver): 5 in
- Acoustical:
- Operating Frequency Range: 180 Hz – 20 kHz
- Phase Response: 300 Hz – 18 kHz ±60 degrees
- Dynamic Range: >110 dB
- Crossover: 2300 Hz
- Transducers:
- Low Frequency: Two 5-inch cone drivers
- High Frequency: One 1-inch metal dome tweeter
- Connector Options:
- Phoenix
- Wiring: 5-Pin Male
- DC Power (–): Pin 1
- DC Power (+): Pin 2
- Audio Shield, Chassis/Earth: Pin 3
- Audio (–): Pin 4
- Audio (+): Pin 5
- SwitchCraft
- Wiring:EN3 5-Pin Male
- DC Power (–):Pin 1
- DC Power (+): Pin 2
- Audio Shield, Chassis/Earth: Pin 3
- Audio (–):Pin 4
- Audio (+):Pin 5
- ECO-M
- Wiring:7-Pin Male
- DC Power (–):Pin 1
- DC Power (+): Pin 2
- Audio Shield, Chassis/Earth: Pin S (Shield)
- Audio (–):Pin 4
- Audio (+):Pin 5
- Phoenix
- Audio Input:
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Input Impedance: 10 kOhm differential between positive (+) and negative (–) audio pins
- DC Blocking: Differential DC blocking up to the maximum common mode voltage
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
- TIM Filter: <80 kHz, integral to signal processing
- Nominal Input Sensitivity: –8.0 dBV (0.4 V rms) continuous average is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 ohms to produce the maximum peak SPL over the operating bandwidth of the loudspeaker
- Amplifier:
- Type: 3-channel, class D
- Output Power: 350 W total
- THD, IM, TIM: <.02%
- Load: 8 Ohm low channels, 8 Ohm high channel
- Cooling: Convection
- Finish:: Black textured
- Protective Grille:: Powder-coated, hex-stamped steel with black mesh screen
- Rigging:: Three 3/18”-16 or metric M10 nut plates
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 0.08 kHz
- Maximum SPL (Sound Pressure Level): 123 dB
- Power Handling: 350 Watt
Suggested Products
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com