Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Arrayable Loudspeaker
Series: JM Series
Model: JM-1P
- Applies modern technology to overcome historical point source array limitations
- Tight-packing results in cleaner sightlines and neater appearance, and eliminates angle setting
- Each JM-1P cabinet utilizes an REM and horn for precise 20° horizontal coverage in tight-packed arrays
- Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
- QuickFly rigging offers flexibility of both horizontal and vertical arrays, with option to fly or groundstack
Product Info
Tech Specs
Documents
No one can do every job with only a single tool, no matter how useful it is.In sound reinforcement, the vertical line array has found great popularity in recent years for a number of good reasons.But Meyer Sound looks further, so we built a line of great self-powered curvilinear array loudspeakers, and then turned our attention towards the other major tool in the live sound toolbox: horizontal arrays.The introduction of the JM series redefines point source systems and sets the new standard in the 21st century.The JM-1P arrayable loudspeaker combines Meyer Sound's famed clarity of sound and robust, self-powered performance with our latest breakthroughs in horn design, rigging and loudspeaker control to produce an extremely easy-to-use, highly versatile arrayable loudspeaker system powerful enough to act as a main system, but flexible enough to serve in any number of supporting roles whether horizontal or vertical, flown or stacked.With the level of performance and flexibility, the JM-1P is a wise investment that has a place in every job and on every tour.Meyer Sound defined the point source array with the classic UPA-1 in 1980, and the self-powered UPA-1P remains one of our top sellers today.With the tremendous technology advances of the last 12 years built into the JM-1P, we are redefining point source systems.The optional RMS remote monitoring system provides comprehensive monitoring of system parameters on a Windows-based computer.
- Applies modern technology to overcome historical point source array limitations
- Tight-packing results in cleaner sightlines and neater appearance, and eliminates angle setting
- Each JM-1P cabinet utilizes an REM and horn for precise 20° horizontal coverage in tight-packed arrays
- Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
- QuickFly rigging offers flexibility of both horizontal and vertical arrays, with option to fly or groundstack
- Consistent and predictable array performance ensures accurate system design
- Applications
- Theatres and theatrical sound reinforcement
- Houses of worship
- Portable and installed AV systems
- Center and sidefill in large-scale systems
- Concert Halls
- Distributed systems in stadiums and theme parks
- Nightclubs
- Loudspeaker Setup - Rigged
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 53 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Coverage Horizontal: 20 degrees
- Coverage Vertical: 60 degrees
- Maximum SPL (Sound Pressure Level): 138 dB
- Power Handling (High Frequency): 250 Watt
- Power Handling (Low Frequency): 1200 Watt
- AC Voltage: 264 Volts
- Active Power: 1275 Watt
- Current Draw: 21.60 Amps
- Peak Power: 2250 Watt
- Depth: 29.03 in
- Height: 36.08 in
- Width: 16.79 in
- Product Weight: 147 lbs
- Color: Black
- Construction: Multi-ply hardwood, Hex-stamped steel with black mesh screen
- Impedance: 10000 ohm
- Impedance (High Frequency): 8 ohm
- Impedance (Low Frequency): 4 ohm
- Frequency Response2: 56 Hz – 16.5 kHz ±4 dB
- Phase Response: 580 Hz – 16 kHz ±45°
- Dynamic Range: >110 dB
- Low Frequency: High-power 15" cone driver with neodymium magnet Nominal impedance: 2 ? Voice coil size: 4"
- High Frequency: 4" compression driver Voice coil size: 4" Diaphragm size: 4", Exit size: 1.5"
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: Female XLR input with male XLR loop output or VEAM all-in-one connector (integrates AC, audio, and network)
- Wiring: Pin 1: Chassis/earth through 220 k?, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 2: Signal + Pin 3: Signal – Case: Earth ground and chassis
- DC Blocking: Differential DC blocking up to the maximum common mode voltage
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
- TIM Filter: Integral to signal processing (<80 kHz)
- Nominal Input Sensitivity: 0 dBV (1.0 V rms, 1.4 V peak) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 ? in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
- Output Power6: 1275 W (1 x 1000 W, 1 x 275 W)
- THD, IM, TIM: <.02%
Meyer Sound JM-1P Data Sheet.pdf
700 kb
- Data Sheet
Meyer Sound JM-1P Operating Instructions.pdf
7202 kb
- Instructions
JM-1P_2D.zip
369 kb
- BIM Objects
JM-1P_Detail.zip
5117 kb
- BIM Objects
Request Quote
Suggested Products
by
Electro-Voice
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Meyer Sound Laboratories, Inc.
Model: JM-1P
Request more information from a dealer near you
close
Request more information from a dealer near you