Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
12x8 Signal Processor with Digital Audio Bus
Model: BLU-100
- 12 Analog Inputs (with 48v Phantom Power per Channel)
- 8 Analog Outputs
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 48 Channel, Low Latency, Fault Tolerant Digital
Product Info
Tech Specs
Related Products
Documents
The Soundweb London BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BLU-100 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. The BLU-100 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices. Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
- 12 Analog Inputs (with 48v Phantom Power per Channel)
- 8 Analog Outputs
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 48 Channel, Low Latency, Fault Tolerant Digital
- Clear Front Panel LED Indication
- Bi-Directional Locate Functionality
- 12 Control Inputs and 6 Logic Outputs for GPIO
- Soundweb London Interface Kit for Third Party
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet London Architect
- Spec Sheet available - Yes
- Front Panel Led Indicators-Per Input: Signal Present, CLIP, 48V (Input only)
- Front Panel Led Indicators-Other: COM, STAT, ERR, PWR
- Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain
- CMRR: >75 dB at 1KHz
- Input Noise (E.I.N.): <-128 dBu typical with 150ohm source
- Phantom Power: 48 V nominal, selectable per input
- A/D Latency: 37/Fs [0.77ms@48k]
- Analog Outputs: 8 electronically balanced on Phoenix/Combicon removable screw connectors
- Maximum Output Level: +19 dBu
- Output Impedance: 40 ohm balanced
- Output Impedance: 20 ohm unbalanced
- D/A Latency: 29/Fs [0.60ms@48k]
- Control Ports: 12 inputs and 6 outputs
- Control Input Voltage: 0 to 4.5 V
- Control Input Impedance: 4.7kohm to +5V (2-wire mode), >1Mohm (3-wire mode)
- Logic Output Voltage: 0 or +5 V unloaded
- Logic Output Impedance: 440 ohm
- Logic Output Current: 10mAsource, 60mA sink
- Watchdog Output: Phoenix/Combicon connector for failsafe control
- Opto Output Current: 14 mA maximum
- Withstanding Voltage: 80 V maximum (Off)
- Series Impedance: 220 ohm (isolated)
- Control Network Connectors: RJ45 Ethernet connector
- Control Network Maximum Cable Length: 100m/300ft on Category 5 cable between device and Ethernet switch
- BLU link Connectors: 2 x RJ45 Ethernet connectors
- BLU link Maximum Cable Length: 100m/300ft on Category 5e cable between devices
- Max. Number of Nodes: 60
- Latency: 11/Fs [0.23ms@48k]
- Pass Through Latency: 4/Fs [0.08ms@48k]
- Power Consumption: <55 VA
- BTU Rating: <188 BTU/hr
- Operating Temperature (Maximum): 95 F
- Operating Temperature (Minimum): 41 F
- Input Impedance: 3500 ohm
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- AC Voltage: 240 Volts
- Depth: 9 in
- Height: 1.75 in
- Width: 19 in
- Product Weight: 6.40 lbs
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Crosstalk: 75 dB
- Dynamic Range: 108 dB
BLU-GPX
- General Purpose I/O Expander
BLU100_DataSheet.pdf
720 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
BSS Audio, Ltd.
Model: BLU-100
Request more information from a dealer near you
close
Request more information from a dealer near you