The RD series 6” Fresnel LED fixture is perfect for mounting on clouds and soffits, as well as for general illumination where it is desirable to have access to the electronics from a catwalk or from an equipment room. The RD series 6” Fresnel produces up to 10,674 lumens with excellent dimming, tight beam control, and a high quality of light. The luminaire provides the look and feel of a natural, single source incandescent light, as well as excellent LED performance and longevity. It is a great choice for atriums, auditoriums, churches, museums, schools, studios, theatres and similar locations.<br><br>Power connections may be hardwired internally with rigid/flex conduit connections and the provided flip lever Wago connectors, or externally with a 72” 18/3 SJO wire whip, or connected to an optional external flush Neutrik PowerCon connector. DMX data connections may be hardwired with the provided IDC or screw terminal plugin connectors; or the optional external flush mounted Neutrik 5 pin XLR; 3 pin XLR; or RJ-45 Ethercon connectors. Optional LumenRadio wireless DMX is also available to provide control data to the fixture.<br><br>The Light Source, Inc. RD Series fixtures are fully DMX dimmable with extremely smooth 24 bit dimming utilizing only single channel DMX dimming control. The dimmer microprocessor is able to use over 16 million steps from full intensity to off for incredibly smooth dimming. There is no flicker on video with either line scan or global camera shutters interacting with the 30khz output frequency. The DMX line is fully isolated to 2,500V per microsecond. The proprietary thermal mass equivalence may be enabled during installation by turning dip switch 1 to off. This setting allows the DMX control channel 512 to change the dimming performance to emulate a large or small incandescent lamp, or to change the dimming performance to an instant response.