Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Active Single-Pair Receiver
Series:
Model: TX-TPR1A
- Single -10 dBV Unbalanced or +4 dBu Balanced Output
- Phono Jack and Detachable Terminal Block Outputs
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-Through to LOOP OUT Jack
- Powered Locally or Remotely through RJ45 Jack
Product Info
Tech Specs
Related Products
Documents
Accessories
The TX-TPR1A is a single-pair audio receiving module compatible with RDL Format-A twisted pair products. A front-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A studio-quality buffer amplifier feeds the outputs at the correct operating level.The TX-TPR1A is a single-pair receiver, bridging the input signal from the cable pair set on the front-panel switch during installation. Because this module receives only one cable pair, a LOOP OUT RJ45 jack is provided for connecting additional Format-A receivers. Two other single-pair receivers may be chained to the LOOP OUT jack, or a single two-pair receiver may be connected. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through from the INPUT jack to the LOOP OUT jack. The TX-TPR1A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT and LOOP OUT RJ45 jacks. The TX-TPR1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.
- Single -10 dBV Unbalanced or +4 dBu Balanced Output
- Phono Jack and Detachable Terminal Block Outputs
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-Through to LOOP OUT Jack
- Powered Locally or Remotely through RJ45 Jack
- Fused Local Power Feeds all Modules Connected to RJ45s
- Local Power Input on Terminal Block or dc Power Jack
- Blue LED Indicates Module is Powered
- Daisy-Chain with Additional Format-A Receivers
- Studio-Quality Precision Active Balanced Circuitry
- Operating Temperature (Maximum): 131 F
- Operating Temperature (Minimum): 32 F
- Depth: 2.09 in
- Height: 1.60 in
- Width: 3 in
- Inputs: RDL TP Format-A
- Input Connection: RJ45
- Format-A Signal Pair Used: Switch-selectable A, B, or C
- Format-A Output: RJ45 LOOP OUT
- Ouputs (2): 150 ohm Balanced; 1 k ohm Unbalanced
- Output Connection: Detachable Terminal Block (Bal); RCA (Unbal)
- Output Level: +4 dBu al., +22 dBu Max; -10 dBV Unbal.
- Frequency Response: 10 to 50000 Hz (+/- 0.1 dB)
- THD+N: < 0.005 %
- Noise below +4 dBu: < 90 dB
- Headroom above +4 dBu: > 18 dB
- CMRR: > 80 dB (50 Hz to 150 Hz)
- Power Requirement: 24 VDC @ 35 mA plus connected loads
D-BT1A
- Wall-mounted Bluetooth Audio Format-A Interface
D-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output
D-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs
D-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
D-TPSM2A
- 2-pair Audio Sending Module, White
DB-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone $amp; Stereo Mini-jack In
DB-TPSM2A
- 2-pair Audio Sending Module, Black
DS-BT1A
- LED Status Indication Wall-mounted Bluetooth Audio Format-A Interface
DS-TPR1A
- Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output
DS-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out
DS-TPS2AM
- Active Two-Pair Sender, Twisted Pair Format-A, XLR Microphone & Stereo Mini-jack In
DS-TPSM2A
- 2-pair Audio Sending Module, Stainless Steel
FP-TP4PW
- Power Inserter - Twisted Pair - Four Sets of Outputs - Signal Loop-through
FP-TPX3A
- Format-A Twisted Pair Remote Controlled Mixer
RU-NFD
- Network to Format-A Interface/Distributor
RU-NFDP
- Network to Format-A Interface/Distributor with PoE
RU-TP4PW
- Power Inserter - Twisted Pair - four sets of outputs - signal loop-through
RU-TPDA
- Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs
RU-TPS4A
- Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs
TX-TP1PW
- Power Inserter
TX-TPR3A
- Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs
TX-TPR6A
- Passive Single-Pair Receiver, Twisted Pair Format-A
TX-TPS1A
- Active Single-Pair Sender, Twisted Pair Format-A
TX-TPS3A
- Active Three-Pair Sender, Twisted Pair Format-A
TX-TPS6A
- Passive Single-Pair Sender, Twisted Pair Format-A
TX-TPSA1A
- Three-Pair Combiner to Single-Pair Sender
Datasheet for Active Single-Pair Receiver - Twisted Pair Format-A
220893 kb
- Other
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Radio Design Labs
Model: TX-TPR1A
Request more information from a dealer near you
close
Request more information from a dealer near you