Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Type 10S Stereo Direct Box
Model: DT10S
- Supremely accurate response
- 1/4-in, RCA, and 1/8-in input connectors
- Phantom/battery power test feature
- Rock-solid transformer isolation
- Ultra-low interchannel cross-talk
Product Info
Tech Specs
Related Products
Documents
Type 10S Stereo Direct Box is a two-channel version of the Type 10 Direct Box. Each channel uses the same innovative circuitry as the Type 10—delivering industry-leading technical performance—with some new features that add versatility. The Type 10S will not distort your sound regardless of the frequency or level of the audio source you plug in. The frequency response is flat from 10 Hz to 50 kHz, with a phase response that is linear within 2 degrees for the full audio range. The combination of flat and extended frequency response with linear phase delivers clean and accurate transient response which is essential for preserving the true character of the source. Since the Type 10S uses an active circuit, your signal level is preserved, not padded by 20 dB or more as with passive boxes. This means that any noise, buzz, hum, or RF interference added by all of the following devices in the signal chain will be 20 dB less relevant to your overall sound quality. Although active circuitry requires power to operate, we decided to give you some easy options for powering the Type 10S. You only need to provide phantom power to Channel A, and if you don't have phantom available, the Type 10S will automatically use its internal battery which lasts for over 100 hours. As with all Countryman DIs, the box is mechanically and electrically designed to withstand abuse. The shell is constructed of thick extruded aluminum. The circuit board is potted in epoxy, and protected electrically from high voltage discharges at the input. All switches and connectors are fully recessed—if a switch gets flipped, it is only because you absolutely intended to do so. Transformer isolation is tested for each box by connecting 500 VAC from instrument ground to pin 1 for both XLR outputs.
- Supremely accurate response
- 1/4-in, RCA, and 1/8-in input connectors
- Phantom/battery power test feature
- Rock-solid transformer isolation
- Ultra-low interchannel cross-talk
- Wide, flat bandwidth
- Built extremely tough for the road
- Spec Sheet available - Yes
- Frequency Response: 10 to 50000 Hz (+/- 1 dB)
- Deviation From Linear Phase: +2(30 Hz), 0 (100 Hz to 20 kHz) deg
- Distorton THD at 1 kHz: Less than 0.001 %
- DistortionTHD at 30 Hz to 20 kHz: less than 0.005 %
- Distortion IMD: less than 0.005 % (10 kHz/60 Hz, 4:1)
- Power Options: 48 V Phantom (1.5 mA), 9V
- Battery: 4.8 mA (130 hrs. on a typical alkaline)
- Input Protection: 220 Vrms
- Transformer Isolation Voltage: > 500 V
- Padding Settings: 0, -15, -30 dB
- RF Filtering(input): 1.5 MHz
- RF Filtering(output): 60 kHz
- Maximum Input Level (1% THD)at 0 dB pad: 6 Vpp
- Maximum Input Level (1% THD)at -15 dB pad: 33 Vpp
- Maximum Input Level (1% THD)at -30 dB pad: 190 Vpp
- Input Resistance at 0dB pad: 10 Mohm
- Input Resistance at -15, -30 dB pad: 10 kohm
- Input Capacitance: 240 pF
- Output Polarity: Pin 2 positive
- Depth: 6.25 in
- Height: 4 in
- Width: 2 in
- Product Weight: 1.94 lbs
DT10
- Type 10 Direct Box
Type 10S Datasheet.pdf
1530 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Countryman Associates, Inc.
Model: DT10S
Request more information from a dealer near you
close
Request more information from a dealer near you