Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Signal Processing Systems : Decoders & Encoders : Blonder Tongue Laboratories, Inc. - HDE-8C-QAM w/Opt 2
Request Quote
All Products
MPEG-2 HD Encoder with Option 2
Model: HDE-8C-QAM w/Opt 2
- Accepts up to 8 programs from any of the following inputs: 8xComponent and 8xComposite
- Supports additional 1 spare input to replace a failed input
- Digitizes, MPEG-2 encodes, and multiplexes up to 8 inputs into 4 QAM output channels (2 programs per QAM channel)
- Provides any 1 of the 4 QAM output streams in ASI format
- Configurable to ITU-T J.83 Annex A and B digital QAM formats
Product Info
Tech Specs
Documents
HDE-8C-QAM w/Opt 2 (MPEG-2 HD Encoder: 8xComponent/Composite to 4xQAM) accepts up to eight analog programs from any of the following inputs: 8xComponent and 8xComposite. The encoder is equipped with a spare input (9th input) to replace any one of the primary eight inputs in the event of a failure. The encoder digitizes, MPEG-2 encodes each input into a high-definition stream, multiplexes the resulting eight streams, and then modulates them onto four adjacent watermarked QAM channels in the 54-1002 MHz range (CATV 2-158). Any one of the four QAM outputs is also available in ASI format. The encoder supports Dolby® Digital audio encoding, and Closed Captioning (EIA-608) for each of the eight encoded programs. It is also equipped with an Emergency Alert System (EAS) interface consisting of a composite video and L/R audio program input. EAS triggering is via a 5-12 VDC input or dry contact closure available from most EAS receivers. A front-panel RF test point allows for monitoring/testing of the QAM output without service interruption. Comprehensive remote monitoring and control is accomplished using any standard Web browser via a rear-panel 10/100Base-T Ethernet connection. The encoder accepts eight analog programs from DIRECTV Network’s H25-100 satellite receivers. In the event of a failure on any one of the primary eight receivers, the HDE-8C-QAM w/Opt 2 will automatically switch over to the spare receiver to maintain the program stream. Remote monitoring and control of up to nine DIRECTV Network’s H25-100 satellite receivers is provided through UPnP protocol using a standard Web browser via a rear-panel 10/100Base-T Ethernet connection.
- Accepts up to 8 programs from any of the following inputs: 8xComponent and 8xComposite
- Supports additional 1 spare input to replace a failed input
- Digitizes, MPEG-2 encodes, and multiplexes up to 8 inputs into 4 QAM output channels (2 programs per QAM channel)
- Provides any 1 of the 4 QAM output streams in ASI format
- Configurable to ITU-T J.83 Annex A and B digital QAM formats
- Provides comprehensive GUI-based monitoring and control via standard Web browsers
- Provides a front-panel RF test point (at 20 dB below primary QAM output)
- Equipped with EAS interface (Analog Video + L/R Audio) and triggering compatible with all EAS receivers
- Supports Real-time Dolby® Digital audio encoding
- Supports Closed Captioning EIA-608 for each of the 8 encoded programs
- Supports user-defined PSIP configuration
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Input Signal Types: MPEG-2 HD
- AC Voltage (Maximum): 230 Volts
- AC Voltage (Minimum): 110 Volts
- Depth: 19.50 in
- Height: 3.50 in
- Width: 19 in
- Product Weight: 15 lbs
Encoder
1052 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact WEBB Integration
close
WEBB Integration
1420 S 4800 W
Suite D2
Salt Lake City, UT 84104
USA
(801) 484-8567
www.webbintegration.com
Contact in regards to this product:
Blonder Tongue Laboratories, Inc.
Model: HDE-8C-QAM w/Opt 2
Request more information from a dealer near you
close
Request more information from a dealer near you